| Sign In | Join Free | My burrillandco.com |
|
1 Years
| Ask Lasest Price | |
| Delivery Time : | communicate |
| Payment Terms : | T/T |
| Certification : | CE 、ROHS 、FCC |
| Price : | 50-100 USD |
| Supply Ability : | 100000 per month |
Magnetic BLE Axle Temperature Sensor System
The temperature sensor adopts a magnetic mounting method and can be directly attached to the vehicle wheel hub or fender. It is used to collect temperature data at key positions such as the wheel rim and hub, and transmits the data to the host computer via Bluetooth signal.
1. Bluetooth transmission with millisecond-level fast connection and no delay in information transfer.
2. Ultra-low power consumption, high stability, and strong anti-interference capability;
3. Suitable for commercial vehicles and other vehicle models;
4. Sensitive response to temperature changes;
5. IP67 protection rating; lightweight and compact;
6. Magnetic mounting, easy to install
No. | Item | Specification |
1 | Battery Model | CR 2050 |
2 | Operating Voltage | 3V |
3 | Standby Current | ≤2.5 uA |
4 | Detection Time | 30ms |
5 | Detection Time Interval | 4s |
6 | Transmission Current | 9uA |
7 | Transmission Time Interval | 5min |
8 | Bluetooth Version | 5.2 |
9 | Temperature Measurement Range | -40℃～125℃ |
10 | Temperature Measurement Accuracy | ±1℃ |
11 | Operating Temperature Range | -40℃～125℃ |
12 | Bluetooth Operating Frequency | 2.4 GHz |
13 | Bluetooth Transmission Power | Max:6dBm |
14 | Protection Rating | IP67 |
15 | Weight | 15.1g |
V. Installation Instructions
Installation Method 1:
1, Preferably mount the sensor on the outer wheel hub;
2, The installation position and effect are shown in the figure below:
3, Precautions:
u If there is thick mud on the mounting position of the wheel hub, use a wire brush to clean off the surface mud; otherwise, the accuracy of temperature monitoring and the magnetic adhesion strength may be affected.
Installation Method 2:
1, If the wheel hub is not flat enough or there is no suitable mounting position, install the product on the inner fender;
2, The installation position and effect are shown in the figure below:
3. Precautions:
u When installing, choose a flat position on the fender. Do not place screws or other objects under the sensor that could prop it up; otherwise, the accuracy of temperature monitoring and the magnetic adhesion strength may be affected.
|
|
